Bearing NJ410 CPR, China. Type - cylindrical roller with one flanged inner ring. Dimensions: 50x130x31 mm. Corresponds to the bearing 42410 GOST 8338-75.

Product not available

Sorry, this product is currently unavailable. But we can offer you an alternative product. Please, call.

Manufacturer
China
Country of origin
China
Designation:

NJ410 (DIN 5412-1);
42410 (GOST 8328-75, USSR).

Design:

The cylindrical roller bearing consists of two rings (internal and external) and rolling elements (cylindrically-shaped rollers), connected with a cage - separator.

Features:

- with one flanged inner ring
- two protection flanges on outer ring

Advantages and restrictions:

Due to the greater contact area of the roller relatively to the ball - roller bearings provide approximately two times greater static and dynamic loads. This is their main advantage. The main limitation of roller bearings is their inability to withstand axial loads. Since only the lateral surface of the roller is a working part, such bearings can withstand only radial loads.

Parameters

Weight, W

2.32 kg

Inner diameter, d

50 mm

Outer diameter, D

130 mm

Total width, T

31 mm

Reviews of NJ410 E DIN 5412-1 [China] Cylindrical roller bearing

Be the first to write your review!

Write a review

Important! If you want your review to be passed and published please read our rules.