There are 0 items in your cart. There is 1 item in your cart.
V-belt of profile C(22)x1220Lw Stomil Standard based on chloroprene rubber for works in drives of machines, generators, industrial equipment, agricultural and construction equipment, other equipment.
Classical section wrapped V-belt C22X1250Ld DIN2215, ISO 4184 Stomil Standard. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - green.
Classical section wrapped V-belt C22X1256Ld DIN2215, ISO 4184 Bando, Japan. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Inches desiagnation: C047.
Classical section wrapped V-belt C22X1260Ld DIN2215, ISO 4184 Stomil Reinforced. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - yellow.
Classical section wrapped V-belt C22X1300Ld DIN2215, ISO 4184 CZ, Czech Republic. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm.
Classical section wrapped V-belt C22X1300Ld DIN2215, ISO 4184 Stomil Standard. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - green.
Classical section wrapped V-belt C22X1320Ld DIN2215, ISO 4184 Stomil Reinforced. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - yellow.
Classical section wrapped V-belt C22X1320Ld DIN2215, ISO 4184 Stomil Standard. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - green.
Classical section wrapped V-belt C22X1350Ld DIN2215, ISO 4184 CZ, Czech Republic. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm.
Classical section wrapped V-belt C22X1350Ld DIN2215, ISO 4184 Stomil Standard. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Material - chloroprene rubber. Marking color - green.
Classical section wrapped V-belt C22X1358Ld DIN2215, ISO 4184 Bando, Japan. Profile (cross-section) dimensions: Width x Top / b x h / 22X14 mm. Inches desiagnation: C051.
The C profile belt is a type of V-belt used to transmit mechanical energy between pulleys in various types of equipment.
Belt width - 22 mm.
Belt height - 14 mm.
V-belt angle - 40°.
Operating temperature range from -30°C to +80°C.
Maximum linear speed - 30 m/s.
The minimum pulley diameter is 224 mm.
Material - rubber with textile or polyester cord.
- belongs to the classical V-belts (DIN 2215 or ISO 4184, GOST 1284-89);
- designed to transmit high forces - used in powerful industrial drives;
- can operate on large pulley diameters;
- well suited for low-speed drives with high torque;
- material - rubber with textile cord or modern synthetic materials;
- good adhesion to the pulleys due to the wedge shape.
- Reliability and long service life;
- resistance to abrasion and oils;
- high efficiency of energy transmission;
- operation under high load and dust conditions.
C 2400 - where C is the profile, and 2400 mm is the length of the belt on the outer side.
- combines, seeders, balers;
- crushers, fans, mixers;
- concrete mixers, generators;
- pump drives, compressors;
- Saws, machine tools, feeders.
The C profile belt is designed for high torque and long, trouble-free operation.
When replacing the belt, always check that the profile, length and tension are correct and that the pulleys are in good condition. Worn pulleys can significantly reduce the life of a new belt.