No products
*All prices are indicated with VAT
Bearing 6202-2RSH/С3GJN SKF, Sweden. Type: single row ball bearing with RS type poliuretan sealing on both sides and with C3 clearance. Dimensions 15x35x11 mm. Performance GJN - low friction and high-speed capability (43000 r/min).
Bearing 6203-2RSH/C3 SKF, Italy. Type: single row ball bearing with RS type poliuretan sealing on both sides and with C3 clearance. Dimensions 17x40x12 mm. Corresponds to the bearings 6203-2RS C3 DIN 625-1 and 180203 GOST 7242-81.
Bearing 62032RSC3 Koyo, Japan. Type: single row ball bearing with RS type poliuretan sealing on both sides and with C3 clearance. Dimensions 17x40x12 mm. Corresponds to the bearings 6203-2RS C3 DIN 625-1 and 180203 GOST 7242-81.
Bearing 6203LLUC3/5K NTN, Taiwan. Type: single row ball bearing with RS type poliuretan sealing on both sides and with C3 clearance. Dimensions 17x40x12 mm. Corresponds to the bearings 6203-2RS C3 DIN 625-1 and 70- 180203 GOST 7242-81.
Bearing 62201 2RS CX, Poland. Deep groove ball bearing. Single row. RS-type shields on both sides. Wide section. Dimensions (dxDxB): 12x32x14 mm. Correspond to USSR / CIS designation 180501 GOST 8882-75 and 62201-2RS DIN625-1.
Bearing 62201 2RS/C3 PFI, United States. Deep groove ball bearing. Single row. RS-type shields on both sides. Wide section. Dimensions (dxDxB): 12x32x14 mm. Correspond to USSR / CIS designation 180501 GOST 8882-75 and 62201-2RS C3 DIN625-1.
Bearing 62201-2RSR ZVL, Slovakia. Deep groove ball bearing. Single row. RS-type shields on both sides. Wide section. Dimensions (dxDxB): 12x32x14 mm. Correspond to USSR / CIS designation 180501 GOST 8882-75 and 62201-2RS DIN625-1.
Deep groove ball bearing BB1-3255 SKF. Dimensions: 30x72x17/20.5 MM. Automotive bearing for gerbox VW.
Bearing HK1210 CX Poland. Type: radial drawn cup needle roller bearing with open ends. Dimensions (FwxDxC): 12x16x10 mm. Mounting directtly on shaft ore iner ring IR8X12X10,5
Bearing HK1210 NTN Japan. Type: radial drawn cup needle roller bearing with open ends. Dimensions (FwxDxC): 12x16x10 mm. Mounting directtly on shaft ore iner ring IR8X12X10.5