Bushing

Taper Bush TB1610/35. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=35 mm). Availability key a width b=10 mm. 

Taper Bush TB2012/30. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=30 mm). Availability key a width b=8 mm. 

Taper Bush TB2012/32. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=32 mm). Availability key a width b=10 mm. 

Taper Bush TB2517/25. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=25 mm). Availability key a width b=8 mm. 

Taper Bush TB2517/35. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=35 mm). Availability key a width b=10 mm. 

Taper Bush TB2517/35. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=35 mm). Availability key a width b=10 mm. 

Taper Bush TB2517/60. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=60 mm). Availability key a width b=10 mm. 

Taper Bush TB3020/50. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=50 mm). Availability key a width b=14 mm. 

Taper Bush TB1008/14. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=14 mm). Availability key a width b=2.3 mm. 

Taper Bush TB1108/10. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=10 mm). Availability key a width b=4 mm. 

Taper Bush TB1108 5/8. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=15.875 mm). Availability key a width b=4.8 mm. 

Taper Bush TB1210/22. Used for mounting and dismounting V-belt pulleys, timing belt pulleys, flexible couplings, HRC couplings, weld-on hubs, chain sprockets on the shaft (diameter d=22 mm). Availability key a width b=6 mm.