Manufacturer designation:

4T-JLM710949/JLM710910 

Designation via standards:

JLM710949/JLM710910 - ANSI/ABMA 19.2;
JLM710949 - inner ring and cage with taper roller;
LM710910 - outer ring

Design:

The bearing consists of two rings (inner and outer) and rolling elements (tapered rollers) which are connected by a cage. The inner ring with a cage and rolling elements is a CONE. The outer ring is a CUP.
The design of tapered roller bearings suites for the perception of combined (radial and axial) loads. Tapered roller bearings have a split construction: the inner ring with the rollers and separator create the unit, that can be mounted separately from the outer ring.

Features:

inches dimensions